This Tutorial is to guide you how to Install Official Stock Rom OR How to get your Bricked phone back to normal working condition. Sometimes due to installation of custom rom that are not meant for your device you often end up bricking your device i.e Your phone doesn’t starts and even charge which ultimately is a brick or Boot Loop in which it keeps restarting but you can get back to normal easily by restoring your data for flashing rom through CWM but sometimes you can’t even goto recovery mode so This isn’t the end of your phone. Today I’m posting this about how to unbrick your phone, you can even use this method to install stock rom.
Requirements:
Requirements:
- A PC with Windows or Linux OS.
- USB Cord
- Your Android device.
- Original/Working Stock ROM
Now where to find this Stock Rom? Guys at FirmwareFiles.com have uploaded almost every single stock firmware/rom for our Gionee Marathon M3. You can find these files here. And the awesome thing is that each and every firmware comes with proper drivers and SP FlashTool, so that you won't have to download them separately.
Installation Instructions:
1. Once you have downloaded stock firmware from FirmwareFiles.com, extract it and you'll get following folders.
2. Open Driver and install Driver if you haven't already. Next open Flash Tool and run Flash_Tool.exe, you'll see something like this.
3. Click on Scatter-loading and navigate to file named MT6582_Android_scatter.txt inside Firmware folder.
4. Once Scatter files loads, Press Download (wait don't connect your phone now).
5. Now Turn Off your device and connect it to PC using USB cable. Rom Installation Process will now start.
6. Once flashing is complete, a Green Ring will appear.
7. Congratulations Now you can close Flash Tool and disconnect your device from PC.
**Note: If you get "PMT changed for the ROM, it must be downloaded." error don't worry, it can easily be fixed. In Flash_Tool after loading scatter file press format. Once Format is complete follow step 4 onwards.
0 comments:
Post a Comment